Author Archive

PattonFab.com T-Shirt

Black 50/50 Blend Jerzees Dri-Power Active Shirt.Great Shirt to work hard in. Show your Support for a Small USA Made Company!!!!

Baja Designs S2 Flush Mount Brackets

Designed to mount the S2 lights in a protective 3/16″ Housing. The original Mounting design is mainly used for the Thuren High Clearance Bumper although these housings can be used to mount to any flat surface. Bolt on needs a 3″x7″ flat surface and the...READ MORE

2010-2016 Dodge 4th Gen Pre Runner Tube Bumper

Inventory : Bumpers are made per Order and not stocked. Please Email about Status of build time. Fully bolt on tube bumper for the 2500/3500 2010-2016 4th. Mount up to a 30″ Single or Double Row LED inside the Mail Slot. Generation Dodge Trucks. Mig/Tig...READ MORE

03-14 Dodge 2500/3500 Baja Designs Mounts

Pick Your Combo (All Combo’s come with the tow hook mount) Mount your 10″ or 20″ Baja Designs Stealth, ONX or ONX6 in between your bumper opening. Complete Bolt on behind Tow Hooks. Comes With new 3/8″ Stainless mounting Hardware. Mount is made out of...READ MORE

Thuren Fab TRUSS KIT 03-13 TRUCKS

AAM 9.25 axles are prone to bending under harsh off road conditions when the front axle sees high shock loads like hitting the bump stops at a high rate of speed. Our weld in truss kit is made from the same 1.5”x.375” DOM tubing as...READ MORE

Flat Mount Baja Designs ONX/ONX6

Allows you to Mount the ONX/ONX6 Straight out. Comes with 3/8″ Stainless Hardware and PowderCoated Black. Sold in a set of 2.

Weldable Single Row LED Mounting Tabs

Weldable Mounting Tabs For Led Knockoff Lights. 1/4″ HR Steel. Comes in a set of 2.

Weldable Rigid or Knockoff LED Mounting Tabs

Weldable Mounting Tabs for any single Bolt Mounted Led Light. 1/4″ hr steel. Sold in set of 2.

Baja Designs 0nx6 Weld On Mount

Weldable Baja Designs ONX6 Mounts. 3/16″ laser cut HR steel. Comes in a set of 2. Recommend Double nutting the onx6 stud and remove the stud for mounting.

Patton Rear Tube Bumper Using (Thuren Fab Frame Brackets)

Adds more height over your Stock hitch receiver. The bumper is made using Thuren Frame Brackets and a 4×4 square tube is added with a Curt hitch receiver welded to it. Eye loops are also added for safety chain mounting.  1 3/4″ DOM tube is...READ MORE

Local Only Thuren Fabrication Weld Install Prices

Truss Weld Install $350.00 Thuren Truss With C’s add $200.00 Parts Included. Thuren Long Arm Weld Bracket Only Install $225.00 Thuren Long arm full install with factory brackets removed and painted $550.00 Email Orders@pattonfab.com to schedule a Install….. Full Suspension Kits Installed also….. Pattonfab Is Located...READ MORE

2003-2016 Dodge 2500/3500 27″ Single Row 150 watt LED & Mount Combo. Kit

Comes With everything you need to mount a 27″ LED to your 2003-20015 Dodge 2500/3500. This Kit is Completely Bolt on behind Tow Hooks. Comes With new 3/8″ Stainless mounting Hardware, Patton Fab Brackets and Bolts. The Mount is made out of 1/4″ steel and...READ MORE

Shipping Price

March 2, 2015 • Posted by iceman7273 in Blog • • 0 comments

If overcharged for shipping you will be refunded differance once order has been processed. Same goes for being undercharged. Paypal shipping lacks real time shipping prices

03-13 Dodge 2500/3500 Long Travel Traction Bars

Long Travel Traction Bars are a must when you need to limit axle wrap due to aftermarket Leaf Springs and the high torque of the Cummins Engine. Traction Bars also works good for a stock cummins truck that tows heavy Loads. Everything is figured out...READ MORE

2011-2015 Ford F250/F350 LED Mount

Mount a 10″/20″ Rigid/Knockoff LED light using this Mount for Ford 2011-2015 F250/F350. Made out of 1/4″ Hot rolled steel powder coated black. Bolts on above the tow hooks using supplied metric bolts and nuts. USA made with Pride. If overcharged for shipping you will...READ MORE

03-16 Dodge Curt Receiver Tow Hooks

These receiver style tow hooks replace the factory tow hooks on 2003-2009 Dodge Ram 2500/3500 SLT or any Model 2010-2014 Dodge 2500/3500 Ram Truck. Add a range of different accessories and functions. The Fit is snug, however it fits fine. Will not work with Patton...READ MORE

Phone Number

December 30, 2013 • Posted by iceman7273 in Blog • • Comments Off on Phone Number

(866) 699-7798 Call Only Fridays (7-6 pst) Email ORDERS@PATTONFAB.COM For faster Response PattonFab Is Located in Sonoma Ca.

03-16 Dodge 2500/3500 Universal LED Bracket

Designed to mount any kind of led light up to 26″ to your 03-14 Dodge Ram 2500/2500. It’s up to you where to mount the light and drill where needed. Mounting Plate bolts on behind the tow hooks and comes non painted. 3/8″ Stainless mounting...READ MORE

Ram 03-09 Rigid or Knock Off LED Brackets

Brackets are used to Mount your 10″/20″ Rigid or Knockoff Led to the PattonFab All In One LED Mount or Universal mount. The LED light sits just outside the bumper opening. Tig welded and Powder Coated Black. Comes with Stainless Steel mounting Hardware.

2010-2016 Dodge 2500/3500 20″ LED & Mount Combo. Kit

The Combo. Kit is here! Comes With everything you need to mount a 20″ LED to your 2010-2016 Dodge 2500/3500.   We Found A Very High Quality LED Light That Is easy On The Wallet. Tested and Proven in a Agricultural Environment.  . LED Power:...READ MORE

2003-2009 Dodge 2500/3500 20″ LED & Mount Combo. Kit

The Combo. Kit is here! Comes With everything you need to mount a 20″ LED to your 2003-2009 Dodge 2500/3500. We Found A Very High Quality LED Light That Is easy On The Wallet. Tested and Proven in a Agricultural Environment.  . LED Power: 120W...READ MORE

Elite Heat Treated Washers For Thuren/Ballistic Joints

We offer a different solution for the Current Washers. High Strength 60,000 psi spring steel washers then Heat Treated. They have been tested by the hardest off road drivers to date with zero issues due to bending or Cupping. A Set comes with 8 or 16...READ MORE

Dodge Ram Pre-Load Bed Supports

Pre-load bed support’s mount on the rear bed posts next to the tailgate. LH/RH rod ends allow the support rod to pre load the bed post. This will help keep your tailgate from falling off and the bed post cracking during heavy off road use....READ MORE

Sticker Pack

2-  1/2″x2 5/8″ Pattonfab  1- 1 1/2″x8″ Pattonfab 1- 5″x7″ Welder Girl 5 YEAR UV Vinyl Stickers

03-15 Dodge2500/3500 2 Tab All In One Light Bar

03-14 2500/3500 Dodge Ram 2 Tab All In One Light Bar New Design. Lights sit with top of bumper and Reversed Tab’d for better light protection. The center of the light bar now has mounting holes to run a 10″/20″ LED. Current setup is for...READ MORE

03-15 Dodge 2500/3500 3 Tab (All In One Light Bar)

03-15 2500/3500 Dodge Ram All In One Light Bar New Design. Lights sit with top of bumper and Reversed Tab’d for better light protection. The center of the light bar now has mounting holes to run a 10″/20″ LED. Current setup is for Baja Designs...READ MORE

03/09 -10/14 Dodge 2500/3500 LED Mounting Kits

Pick Your  Combo (All Combo’s come with the tow hook mount) Mount your 10″ or 20″  LED in between your bumper opening. Complete Bolt on behind Tow Hooks. Comes With new 3/8″ Stainless mounting Hardware. Mount is made out of 1/4″ steel and 2 stage...READ MORE

Baja Design Stealth/Onx Series Mounting Brackets

Price Includes Shipping. Mounts the 20″ Stealth or Onx  series LED to the Patton Fab L.E.D Dodge Mount. Allows you to mount the light straight back. The factory Baja Mount does not allow this. Powdered Coated Black. Make sure to choose Stealth or Onx mount...READ MORE

03-09 Dodge 2500/3500 Bumper Horns

Made out of  Laser Cut 1/8″ plate and top is tabbed for easy jigged  welding. DOM TUBE with Tig Welded 1/4″ plate will act like a crush when mounting with grade 8  1/2″ bolts. Fully bolt on. Horns are Bent to a C and only...READ MORE

1/4″ Thick Aluminum Skid Plate

Building your own bumper using PattonFab Horns and want to run this skid or need a new one for replacement? Made out of 1/4″ Thick Aluminum and water jetted for added cooling to your truck. . Skid measures 17″x34″. This is sold as Raw Aluminum....READ MORE

3rd Gen. Dodge 2003-2009 2500/3500 Pre Runner Tube Bumper

 Inventory : Bumpers are made per Order and not stocked. Please Email about Status of build time. Fully bolt on tube bumper for the 2500/3500 3rd. Generation Dodge Trucks. Tig Welded CNC bent Mounting Horns. Added front and side plates for horn strength. 1/2″ Stainless Steel...READ MORE

03-14 Dodge Lo-Pro Light Bar 2 Tab Black Powder Coated

For 2500/3500 03-14 Dodge Rams Bolts Under Tow Hooks, No Drilling, 1/4 Cold Roll Steel Brackets, 1 3/4″ .120 wall Tubing, Laser Cut HID Light Tabs (Works for any Light), Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock Nuts. For 03-12...READ MORE

03-15 Dodge Lo-Pro Light Bar 3 Tab Black Powder Coated

For 2500/3500 03-14 Dodge Rams Bolts Under Tow Hooks, No Drilling, 1/4 Cold Roll Steel Brackets, 1 3/4″ .120 wall Tubing, Laser Cut HID Light Tabs (Works for any Light), Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock Nuts. For 03-12...READ MORE

Light Bar GM 3 Tab Powder Coated

For 2500/3500 02-06 Chevy/GMC Trucks Bolts on side of tow hooks, No Drilling, 1/4 ” Laser Cut Brackets, 1 3/4″  .120 Wall Tubing, Laser Cut HID Tabs (Works For Any Light) Mount up to 9″ Lights, Comes With New Bolts, Simple 10 Minute Install. Fits...READ MORE

 
 
 
© Pattonfab.com 2013-2016. All rights reserved.