03-18 Dodge 2500/3500 Universal LED Bracket
Mount any Brand Led light up to 26″ to your 03-13 Dodge
Ram 2500/3500. It’s up to you where to mount the light and drill where
needed. Mounting Plate bolts on behind the tow hooks and comes non
painted. 3/8″ Grade 8 hardware included. If you ditch the tow hooks a 30″ LED will fit.
03-13 Dodge 2500/3500 10/20" Baja onx6 mount
Mount your 10″ or 20″ Baja Designs ONX6 in between your
bumper opening. Complete Bolt on behind Tow Hooks. Comes With new 3/8″
Stainless mounting Hardware. Mount is made out of 1/4″ steel and 2 stage
Powder Coated Black. USA Made!
03-18 Dodge RAM 2500/3500 LED Mounting Kit
Mount your Rigid or Knockoff 10″ or 20″ LED in between your bumper opening. Complete
Bolt on behind Tow Hooks. Comes With new 3/8″ Stainless mounting
Hardware. Mount is made out of 1/4″ steel and 2 stage Powder Coated
Black. USA Made!
03-18 Dodge 2500/3500 Lo-Pro Light Bar 2 Tab
- For 2500/3500 03-18 Dodge Rams
- Bolts Under Tow Hooks, No Drilling, 1/4 Cold Roll Steel Brackets, 1
3/4″ .120 wall Tubing, Laser Cut HID Light Tabs (Works for any Light),
Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock
Nuts.
For 03-12 Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be
used, Although pulling to the left and right with both hooks at the same
time is limited.
03-18 Dodge Lo-Pro Light Bar 3 Tab
For 2500/3500 03-18 Dodge Rams
Bolts Under Tow Hooks, No Drilling, 1/4 Cold Roll Steel Brackets, 1
3/4″ .120 wall Tubing, Laser Cut HID Light Tabs (Works for any Light),
Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock
Nuts.
For 03-12 Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be
used, Although pulling to the left and right with both hooks at the same
time is limited.
03-18 Dodge 2500/3500 Traction Bar Frame/Axle Brackets
Long Travel Traction Axle Brackets. Made out of a 3/16 P&O HR. Mig welded.
Long Travel Traction Frame Brackets. Made out of a 3/16 P&O HR. Machined, Mig welded and Blended. Sold as a complete set.
List Price: $280.00
Our Price: $280.00
03-13 Dodge2500/3500 2 Tab All In One Light Bar
3-13 2500/3500 Dodge Ram 2 Tab All In One Light Bar
New Design. Lights sit with top of bumper and Reversed Tab’d for
better light protection. The center of the light bar now has mounting
holes to run a 10″/20″ LED. Current setup is for Baja Designs Stealth
series.
Bolts Under Tow Hooks, No Drilling, 1/4 Laser Cut Steel Bracket, 1
3/4″ .120 Wall Tubing, Laser Cut HID Light Tabs (Works for any Light),
Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock
Nuts.
For 03-18 Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be used, Although pulling to the left and right with both hooks at the same time is limited.
03-13 Dodge 2500/3500 3 Tab (All In One Light Bar)
03-13 2500/3500 Dodge Ram All In One Light Bar
New Design. Lights sit with top of bumper and Reversed Tab’d for
better light protection. The center of the light bar now has mounting
holes to run a 10″/20″ LED. Current setup is for Baja Designs Stealth
series
Bolts Under Tow Hooks, No Drilling, 1/4 Laser Cut Steel Bracket, 1
3/4″ .120 Wall Tubing, Laser Cut HID Light Tabs (Works for any Light),
Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock
Nuts.
For 03-15 SLT Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be used, Although pulling to the left and right with both hooks at the same time is limited.
03-09 Dodge 2500/3500 Bumper Horns
Made out of Laser Cut HR 1/8″ & 3/16 plate. 1.25" Dom Tube Tig Welded will act like a crush when
mounting with grade 8 1/2″ bolts. Fully bolt on. Inside the horn there is .120 lower internal gusset and a 3/16" center gusset to help
support inner 2×2 tube and side support bars. Bottom plates and top
plates are 3/16″ thick. Designed to use a 2" top tube and mount up to a 30" led bar inside the light slot. Comes with front 3/16" front light plate,lower skid mount support and hardware.
List Price: $500.00
Our Price: $525.00
03-13 Patton Rear Tube Bumper Using (Thuren Fab Frame Brackets)
Adds more height over your Stock hitch receiver. The bumper is made
using Thuren Frame Brackets and a 4×4 square tube is added with a Curt
hitch receiver welded to it. Eye loops are also added for safety chain
mounting. 1 3/4″ DOM tube is added to the tube for rear protection.
Comes with 3/4″ hardware and can be shipped Bare or Powder Coated. Comes Standard with License Plate Mount and Trailer Plug Mount. Build time is 1-4 weeks from
order date. Email Orders@pattonfab.com for Freight Shipping Pricing. Average Freight cost is $100-$250 depending on location. Freight Pricing will be invoiced when It is ready to ship.
Please Email First before ordering for current lead times.
S2 Lights Can Be purchased on the website.
List Price: $1,000.00
Our Price: $1,150.00
2003-2009 Ram 2500/3500 Pre Runner Bumper
Bolt on tube bumper for the 2500/3500 2003-2009 3rd Gen. Mount up to a
30″ Single or Double Row LED inside the Mail Slot. Generation Dodge
Trucks. Mig/Tig Welded Bumper horns. The Bumper horns are internal
Gusseted for added strength,1/2″ Stainless Steel Bolts, .120 wall 2″
Tubing, 2x2 square tubing to protect the Inner cooler,Radiator and fully Bolt on 1/4″ Thick
Aluminum Skid Plate. Powder Coated Semi Gloss Black. Average Truck Freight Price is $200-$300. Email About Ordering, Lead Times, Extra/Custom options, no Powder coat take off $200.00 from retail price and a shipping quote ORDERS@PATTONFAB.COM
