baja designs light mount,hella light mount, la paz light mount, 3 hole light mount, 3 hole trick tab, lp9 mount, lp6 mount,lp4 mount, sol tek, weld on light mount, baja designs weld mount, baja designs trick tab

Allows you to Mount the ONX6 Straight out. Comes with 3/8″ Stainless Hardware and Brackets are 304 SS. Sold in a set.
Choose USPS Flat Rate at Checkout

Designed to mount the S2 lights in a protective 3/16″ Housing. The original Mounting design is mainly used for the Thuren High Clearance Bumper although these housings can be used to mount to any flat surface. Bolt on needs a 3″x7″ flat surface and the weld on uses a 3″ x 4″ flat surface.

Comes With all needed SS Hardware. Choose USPS Flat Rate at Checkout

Mount any Brand Led light up to 26″ to your 03-13 Dodge
Ram 2500/3500. It’s up to you where to mount the light and drill where
needed. Mounting Plate bolts on behind the tow hooks and comes non
painted. 3/8″ Grade 8 hardware included. If you ditch the tow hooks a 30″ LED will fit.

Mount your 10″ or 20″ Baja Designs ONX6 in between your
bumper opening. Complete Bolt on behind Tow Hooks. Comes With new 3/8″
Stainless mounting Hardware. Mount is made out of 1/4″ steel and 2 stage
Powder Coated Black. USA Made!

Mount your Rigid or Knockoff 10″ or 20″ LED in between your bumper opening. Complete Bolt on behind Tow Hooks. Comes With new 3/8″ Stainless mounting Hardware. Mount is made out of 1/4″ steel and 2 stage Powder Coated Black. USA Made!

• For 2500/3500 03-18 Dodge Rams
• Bolts Under Tow Hooks, No Drilling, 1/4 Cold Roll Steel Brackets, 1 3/4″ .120 wall Tubing, Laser Cut HID Light Tabs (Works for any Light), Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock Nuts.
  For 03-12 Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be used, Although pulling to the left and right with both hooks at the same time is limited.

For 2500/3500 03-18 Dodge Rams

Bolts Under Tow Hooks, No Drilling, 1/4 Cold Roll Steel Brackets, 1 3/4″ .120 wall Tubing, Laser Cut HID Light Tabs (Works for any Light), Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock Nuts.
For 03-12 Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be used, Although pulling to the left and right with both hooks at the same time is limited.

3-13 2500/3500 Dodge Ram 2 Tab All In One Light Bar

New Design. Lights sit with top of bumper and Reversed Tab’d for better light protection. The center of the light bar now has mounting holes to run a 10″/20″ LED. Current setup is for Baja Designs Stealth series.

Bolts Under Tow Hooks, No Drilling, 1/4 Laser Cut Steel Bracket, 1 3/4″ .120 Wall Tubing, Laser Cut HID Light Tabs (Works for any Light), Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock Nuts.

For 03-18 Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be used, Although pulling to the left and right with both hooks at the same time is limited.

03-13 2500/3500 Dodge Ram All In One Light Bar

New Design. Lights sit with top of bumper and Reversed Tab’d for better light protection. The center of the light bar now has mounting holes to run a 10″/20″ LED. Current setup is for Baja Designs Stealth series

Bolts Under Tow Hooks, No Drilling, 1/4 Laser Cut Steel Bracket, 1 3/4″ .120 Wall Tubing, Laser Cut HID Light Tabs (Works for any Light), Mount UP to 9″ Lights, Comes With New Stainless Steel Bolts, Nylock Nuts.

For 03-15 SLT Dodge Rams,Doesn’t Fit Sport Models, Tow hooks still can be used, Although pulling to the left and right with both hooks at the same time is limited.